Parameter Page E2; Parameter Page Condensation Monitoring - Theben FCA 2 Manual

Fan Coil Actuator FCA 2

3.4.8 Parameter page E2

This page is only available if the Supported function parameter is set to Heating (General
parameter page).
Table 27
Designation
Function of E2
Transmission of E2 status
every

3.4.9 Parameter page Condensation monitoring

Table 28
Designation
Source for drip tray
monitoring
Direction of action of E2
Behaviour in case of
condensate
Transmission of
condensate status every
Updated: Feb-16 (subject to changes)
Values
Contact closed = window closed
Contact open = window closed
do not send cyclically
3 min, 5 min, 10 min, 15 min,
20 min, 30 min,
60 min
Values
E2
Object 16
Contact closed = Condensate
Contact open = Condensate
Cooling off and fan off
Cooling off and fan stage 1
Cooling off and max. fan stage
Only report
do not send cyclically
3 min, 5 min, 10 min, 15 min
20 min, 30 min,
60 min
Meaning
Type of connected contact
(opening contact or NO
contact)
Cyclical transmission time for
input E2
Meaning
Condensate is reported to E2
via a contact
Condensate is reported to
object 16 via the bus.
Type of connected condensate
report contact or condensate
telegram.
Reaction to condensate alarm
Cyclical transmission time for
condensate.
Page
39 89
of