Fan Coil Actuator FCA 2
1.1 Operation and display
FCA 2 is fitted with 9 LEDs and 2 push buttons.
• 3 red LEDs for displaying fan stage/fan speed (see figure 1)
• 1 red LED for heating mode
• 1 blue LED for cooling mode
• 1 red LED for the additional relay (C1)
• 2 red LEDs for inputs 1 and 2 (E1, E2)
• 1 red LED for test mode
• 1 push button for fan stages/fan speed
• 1 push button for heating/cooling mode
Figure 1: LEDs for displaying fan stages or fan speed
S1
S2
1-32 %
33-65 %
By using the manual button, the fan stages can be switched one after another.
• Standard fan control: Off stage 1 stage 2 stage 3 Off stage 1 etc.
• 0-10 V fan control: Off 33% 66% 100% Off 33% etc.
Updated: Feb-16 (subject to changes)
/
S3
Fan stages (standard fan, 1-3 stages)
66-100 %
Fan speed (0-10 V control)
5
89
Page
of