Monitoring Functions - THOMSON LDK 23hs mkII Operator's Manual

Monitoring Functions

Viewfinder connector
1
Use this socket to connect the flying lead from the
viewfinder to the camera.
Caution
Do not attach a lens to the Viewfinder
connector
External video output connector
3
This BNC connector carries the external video signal
from the CPU which is selected with the external
signal selection switch 6.
Viewfinder signal selection switch
4
This switch is used to choose between the local
camera head signal (Y signal) or an external signal for
display (set with (5) ) in the viewfinder.
Location of Controls and Functions
HIGH SPEED HIGH SPEED
LDK23HS mk II
SUPER SLOW MO SUPER SLO W MOTION TION
2
1
.
2
Operator's Manual LDK 23HS mkII - HS Camera System
THS 1391
External signal selection switch
5
This switch is used to select the signal displayed in the
viewfinder when the viewfinder signal selection switch
(4) is in the EXT position. The signal displayed for
each position is as follows:
EXT 1 : CPU external input 1.
EXT 2 : CPU external input 2.
MIX 1 : CPU ext. input 1 and cam. Y signal.
MIX 2 : CPU ext. input 2 and cam. Y signal.
Switches (4) and (5) are disabled when a large lens
adapter is used.
3
4
THS 1390
5
Note
4-5