Control Functions - THOMSON LDK 23hs mkII Operator's Manual

Control Functions

1
2
Select switch
1
This switch, when pressed, selects the particular
menu that is pointed out by the cursor in the display or
sets an on/off function.
Rotary control
2
This up/down scroll switch is used to move through the
various menus of the control system or to set a
particular value for a function. The menu selection
function of the switch is disabled when the viewfinder
text is set to OFF.
Standard File button
3
This green button, when pressed and held for 3
seconds, initiates the recall of the standard set-up
parameters (Refer to the appendix). These parameters
only take effect if the camera is not "On Air".
Location of Controls and Functions
3
Operator's Manual LDK 23HS mkII - HS Camera System
THS 1392
4
The MCP can select the standard file parameters as
a factory or customer standard file.
Data connector
4
This connector allows the direct connection of the
Operational Control Panel (OCP) or the Master Control
Panel (MCP) from the Series 9000 in order to control
camera functions.
Note
4-9