1.5-inch Viewfinder
Mounting the optional 1.5-inch viewfinder
To mount the optional 1.5-inch viewfinder proceed
as follows:
a. Loosen retaining screw (1) of viewfinder support
bracket (2) at the front of the camera handle.
b. Slide the viewfinder onto the viewfinder support
bracket.
c. Tighten the support bracket retaining screw (1)
by turning it clockwise so that the viewfinder is
mounted securely to the support.
d. Connect the viewfinder cable to the viewfinder
connector (3) at the right side of the camera.
e. Clip the viewfinder cable into the clips (4)
provided.
2-4
1
2
Operator's Manual LDK 23HS mkII - HS Camera System
5
3
Note
When dismounting the viewfinder push in retaining
clip (5) on the slide to remove the viewfinder from
the support bracket (2).
4
THS 1372
Assembling the Units