Microphone - THOMSON LDK 23hs mkII Operator's Manual

Microphone

To attach a microphone, the LDK 8330/00 for example,
to the camera proceed as follows:
a. Loosen the retaining screw (1) of the microphone
support bracket (2) on the viewfinder and open.
b. Place the microphone into the support bracket (2).
c. Close the bracket and tighten the microphone
bracket retaining screw (1).
d. Connect the microphone cable to audio connector
1 or 2 at the rear of the camera.
e. Clip the microphone cable into the slot (3) in the
handle of the camera.
Other microphones can also be used, however, ensure
that the phantom power and the sensitivity are set
correctly for the type of microphone in use. Refer to
the installation manual for more information on
selecting the phantom power supply. The audio level
is selected using the camera control system (refer to
Section 6).
Assembling the Units Operator's Manual LDK 23HS mkII - HS Camera System
1
2
3
THS 1379
2-9