Lens - THOMSON LDK 23hs mkII Operator's Manual

Lens

6
5
To attach a lens to the camera head proceed as
follows:
a. Ensure that the lens locking ring (1) is in the
unlocked position - turned counterclockwise.
b. Remove the dust protection cap (2).
c. Slot the lens into the lens mount (3).
d. Turn the lens locking ring (1) clockwise to lock the
lens in place.
e. Connect the lens cable to the lens connector (4) at
the right side of the camera.
f. Clip the lens cable into the clip (5) provided.
Assembling the Units
4
3
Operator's Manual LDK 23HS mkII - HS Camera System
1 2
Caution
Do not attach a lens weighting more
than 5 kg to the camera without a support.
Caution
Do not attach a lens to the Viewfinder
connector (6).
Note
Always mount the dust protection cap when the
lens is not connected to the camera.
THS1370
2-3