Monitoring Functions - THOMSON RP5430 Operator's Manual

Monitoring Functions

1
2
3
12V 1,5A DC Out
4
1 CVBS output connector
1
This BNC connector provides a 1Vpp CVBS output
signal when the optional encoder (LDK 5405/00
for PAL or LDK 5405/50 for NTSC) is fitted.
2 Viewfinder / External video output
2
connector
This BNC connector carries the viewfinder signal or
the external video signal from the Base Station
depending on the position of switch
3 Video output selection switch
3
This switch determines whether the viewfinder signal
from the camera or the external video signal
from the Base Station is available at connector
.
2
4 External signal selection switch
4
This switch selects either the EXT1 or EXT 2 signal
for display in the viewfinder when the viewfinder
signal selection switch
5 Viewfinder selection switch
5
This switch is used to select the camera Y signal or
an external signal - set with
viewfinder. The Ret. button on the lens also
selects this signal in parallel with this switch.
Location of Controls and Functions
Eng Front
Off
Prod Rear
Ext Loc
Mix
Call
CVBS (option)
Mic
VF Ext
Front Rear 48V
Scrip
Light
Breaker DC in
Power on
TP
48V On
Ext 1
Ext 2
Mic 2
.
3
is in the EXT position.
6
- for display in the
6
Operator's Manual LDK 200 Triax
6
5
7
8
6 External signal selection switch
6
This switch selects the signal displayed in the
viewfinder when the viewfinder signal selection
switch is in the EXT position. The signal
5
displayed is as follows:
EXT : Base Station external input 1.
MIX : Base Station external input 1 and
camera Y signal mixed.
Note: Switches and
5
SuperXPander is used.
7 Tally switch
7
The tally switch is used to control the tally indicator at
the front of the viewfinder.
When this switch is set to the ON position, the tally
indicator light when the camera is on-air.
When this switch is set to the OFF position, the tally
indicator does not light when the camera is on-
air.
The tally swith does not control the tally indicator at
the rear of the carrying handle.
8 Tally indicators (red)
8
The red tally indicators at the front of the viewfinder
and at the rear of the carrying handle light to
indicate that the camera is on-air. the tally
indicator at the front of the viewfinder does not
light when the camera is on-air if the tally switch
is set to the OFF position.
are disabled when the
6
4-7