Table 13 USG2200-VPN/USG2200 Front Panel Ports (continued)
LABEL
CONSOLE
USB
P1 ~ P4
P5 ~ P16
P17 ~ P18
3.1.2 Rear Panels
The connection ports are located on the rear panel.
Figure 52 ZyWALL 110 / USG110 / USG210 Rear Panel
Figure 53 ZyWALL 310 / ZyWALL 1100 / USG310 / USG1100 / USG1900 Rear Panel
Chapter 3 Hardware, Interfaces and Zones
DESCRIPTION
You can use the console port to manage the Zyxel Device using CLI commands. You will be
prompted to enter your user name and password. See the Command Reference Guide for
more information about the CLI.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
•
Speed 115200 bps
•
Data Bits 8
•
Parity None
•
Stop Bit 1
•
Flow Control Off
Connect a storage device for system logs (see Maintenance > Diagnostics > System Log) and
storage (see Configuration > System > USB Storage).
These are SFP (1G) ports. These are compatible 1G transceiver modules (at the time of writing):
•
SFP-1000T
•
SFP-SX-D
•
SFP-LX-10-D
•
SFP-BX1310-10-D
•
SFP-BX1490-10-D
•
SFP-LHX1310-40-D
•
SFP-ZX-80-D
These are 1G RJ-45 Ethernet ports.
These are 10G combo (SFP+ & RJ-45) ports. These are compatible 10G transceiver modules (at
the time of writing:)
•
SFP10G-SR
•
SFP10G-LR
ZyWALL USG Series User's Guide
72