ZyXEL Communications ZyWall 110 User Manual page 905

Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Figure 632 Configuration > DHCPv6 > Lease > Add
The following table describes the labels in this screen.
Table 361 Configuration > DHCPv6 > Lease > Add/Edit
LABEL
DESCRIPTION
Name
Type the name for this lease object. You may use 1-31 alphanumeric characters,
underscores(
sensitive.
Lease Type
Select the lease type for this lease object. You can choose from Prefix Delegation, DNS
Server, Address, Address Pool, NTP Server, or SIP Server.
Interface
Select the interface for this lease object.
DUID
If you select Prefix Delegation or Address in the Lease Type field, enter the DUID of the
interface.
Prefix
If you select Prefix Delegation or Address in the Lease Type field, enter the IPv6 prefix of the
interface.
DNS Server
If you select DNS Server in the Lease Type field, select a request object or User Defined in the
DNS Server field and enter the IP address of the DNS server in the User Defined Address field
below.
Starting IP Address
If you select Address Pool in the Lease Type field, enter the first of the contiguous addresses
in the IP address pool.
End IP Address
If you select Address Pool in the Lease Type field, enter the last of the contiguous addresses
in the IP address pool.
NTP Server
If you select NTP Server in the Lease Type field, select a request object or User Defined in the
NTP Server field and enter the IP address of the NTP server in the User Defined Address field
below.
SIP Server
If you select SIP Server in the Lease Type field, select a request object or User Defined in the
SIP field and enter the IP address of the SIP server in the User Defined Address field below.
User Defined
If you select DNS Server, NTP Server, or SIP Server as your lease type, you must enter the IP
Address
address of the server your selected.
OK
Click OK to save your changes back to the Zyxel Device.
Cancel
Click Cancel to exit this screen without saving your changes.
Chapter 43 Object
), or dashes (-), but the first character cannot be a number. This value is case-
_
ZyWALL USG Series User's Guide
905

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents