References - ZyXEL Communications ZyWall 110 User Manual

Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Table 108 Configuration > Network > Interface > Create Virtual Interface (continued)
LABEL
Gateway
Metric
OK
Cancel

10.5.4 References

When a configuration screen includes a References icon, select a configuration object and click
References to open the below screen. This screen displays which configuration settings reference the
selected object. The fields shown vary with the type of object.
Figure 250 References
The following table describes labels that can appear in this screen.
Table 109 References
LABEL
Object Name
#
Service
Priority
Name
Description
Refresh
Cancel
Chapter 10 Interfaces
DESCRIPTION
Enter the IP address of the gateway. The Zyxel Device sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
Enter the priority of the gateway (if any) on this interface. The Zyxel Device decides which
gateway to use based on this priority. The lower the number, the higher the priority. If two or
more gateways have the same priority, the Zyxel Device uses the one that was configured
first.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
This identifies the object for which the configuration settings that use it are displayed. Click the
object's name to display the object's configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a service's name to display
the service's configuration screen in the main window.
If it is applicable, this field lists the referencing configuration item's position in its list, otherwise
N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
ZyWALL USG Series User's Guide
328

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents