User/Group Mac Address Summary Screen - ZyXEL Communications ZyWall 110 User Manual

The following table describes the labels in this screen.
Table 300 Web Configurator for Non-Admin Users
LABEL
User-defined
lease time (max
... minutes)
Renew
Updating lease
time
automatically
Remaining time
before lease
timeout
Remaining time
before auth.
timeout

43.2.5 User/Group MAC Address Summary Screen

This screen shows the MAC addresses of wireless clients, which can be authenticated by their
MAC addresses using the local user database.
Address to open this screen.
Note: You need to configure an SSID security profile's MAC authentication settings to have
the AP use the Zyxel Device's local database to authenticate wireless clients by their
MAC addresses.
Figure 558 Configuration > Object > User/Group > MAC Address
The following table describes the labels in this screen.
Table 301 Configuration > Object > User/Group > MAC Address
LABEL
Add
Edit
Chapter 43 Object
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one that you specified. The
default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of time remaining before
the Zyxel Device automatically logs them out. The Zyxel Device sets this amount of time
according to the:
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see
• Lease time field in the Setting screen (see
This box appears if you checked the Allow renewing lease time automatically box in the
Setting screen. (See Section 43.2.4 on page
reset the lease time automatically 30 seconds before it expires. Otherwise, access users have
to click the Renew button to reset the lease time.
This field displays the amount of lease time that remains, though the user might be able to reset
it.
This field displays the amount of time that remains before the Zyxel Device automatically logs
the access user out, regardless of the lease time.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
ZyWALL USG Series User's Guide
809
Section 43.15.1.1 on page
Section 43.2.4 on page
804.) Access users can select this check box to
Click Configuration > Object > User/Group > MAC
903)
804).