Adjusting Stabilizers - Invacare Storm Series Service Manual

PROCEDURE 15
NOTE: This setting would allow the wheelchair to
roll better on thicker carpeting and minimize scuff-
ing.
M
W
D
W
H
E
E
L
C
H
A
I
R
S
Mounting Screws
(Two (2) on each
bracket)
FIGURE 10 -ADJUSTING WEIGHT DISTRIBUTION

ADJUSTING STABILIZERS

(FIGURE 11)
NOTE: Adjust the stabilizers to the desired handling/ma-
neuverability determined in ADJUSTING WEIGHT DIS-
TRIBUTION in this procedure of the manual.
NOTE: Note the mounting position of the stabilizer to the
base frame for proper reinstallation.
Height Adjustment
All manuals and user guides at all-guides.com
Seat Support Bracket
Front of
Base Frame
Front of Seat
Support Bracket
CLOCKWISE
COUNTERCLOCKWISE
WARNING
The threaded rod must be engaged in the
adjustment barrel at least eight (8) full threads.
Otherwise, injury or damage may occur.
NOTE: Further height adjustment can be accomplished
by using the alternate mounting hole in the base frame.
See DETAIL “A”.
NOTE: Adjust both stabilizers equally to maintain proper
handling.
Adjusting Spring Compression
CLOCKWISE
COUNTERCLOCKWISE
Base
Frame
Locknut
DETAIL “A”
Top of Stabilizer
Fork Assembly
Adjustment Nut
Spring
FIGURE 11 - ADJUSTING STABILIZERS
76
MWD WHEELCHAIRS
Alternate Mounting Hole
Mounting Screw
Top of
Stabilizer Fork
Assembly
Adjustment
Barrel
Jam Nut
Threaded
Rod