Data Port - TANDBERG 7000 MXP User Manual

TANDBERG 7000 MXP
6.1.4

Data port

The data port(s) are implemented as Data Communications Equipment (DCE). The connector
used are female 9-pin D-subs.
NOTE! Data port 2 is used by both Wave II Camera and Precision HD Camera and has different
pin-out scheme for the different use.
The TANDBERG main camera is normally connected to data port 2 and pin number 4 provides
12V DC / 1 Amps to the main camera. Otherwise the pin-outs for both data ports are the same.
Signal name
Carrier detect, CD
Receive data, RXD
Transmit data, TXD
Data terminal ready, DTR
Signal ground, GND
Data set ready, DSR
Ready to send, RTS
Clear to send, CTS
Ring indicator, RI
Data Port 2 with Precision HD Camera
Pin-outs for the THSI (TANDBERG High Speed Interface) on data port 2:
Signal name
Receive video +
Receive data, RXD
Transmit data, TXD
Power, 12V
Signal ground, GND
Receive video -
240
Direction Pin number
From DCE 1
From DCE 2
To DCE 3
From DCE 4
5
From DCE 6
To DCE 7
From DCE 8
From DCE 9
Direction Pin number
To DCE
From DCE
To DCE
To DCE
1
2
3
4
5
6