TANDBERG 7000 MXP User Manual page 232

TANDBERG 7000 MXP
5.8.2.3 SIP Settings
Mode
On Setting the SIP mode to on will enable the system for incoming and outgoing SIP
calls.
Off Setting the SIP mode to off will disable incoming and outgoing SIP calls from the
system.
Display Name
The Display name part of the SIP Address (URI) is usually a full name or system name.
Examples:
"Alice Wonderland"
"System 01"
SIP Address
The SIP Address is the SIP URI used to address the system.
SIP Address (URI): <text field>
Examples:
"alice@example.com"
"1234"
"1234@example.com"
Server Discovery
Auto When Auto is selected, the SIP Server address is obtained using Dynamic Host
Configuration Protocol (DHCP).
Manual When Manual is selected, the manually configured SIP Server address will be
used.
218