Far End Camera Control (Fecc) - TANDBERG 880 User Manual

General use

Far end camera control (FECC)

far end
Press the F E
AR
For this feature to operate the far end must support 'Far end camera control' (H.281).
While activated you will be able to control the far end's camera (pan/tilt/zoom/focus) and presets.
To control the far end camera use the keys below:
for pan/tilt and
OK
Far end presets can be activated by pressing the keys P1 P2 P3 or the number keys 0-9 to activate presets P0-
P9.
Selection of far end videosources is achieved by pressing the buttons below when in FarEndCamera mode:
vcr
main cam aux doc cam
TIP I
T DEPENDS ON THE FAR END SYSTEM CONFIGURATION IF THE FAR END DOCUMENT CAMERA IS DISPLAYED WHEN
To prevent others controlling your camera, select 'Far End Camera Control:Off' in 'Utilities'.
TANDBERG Videoconferencing System
key until the 'FarEndCamera' on-screen indicator is displayed.
ND
zoom
pc
for zooming.
32
D C .
OC AM IS PRESSED