Selecting Video Sources; Controlling The Main Camera - TANDBERG 880 User Manual

When Sleep Mode is selected, the following quick-keys are displayed:
Pressing 'Sleep Now' puts the monitors in sleep mode. The system will still accept incoming calls.
Pressing '60 Minutes' or '3 Hours' will delay entering sleep mode accordingly.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
To see numbers, line status etc., select 'System Info'. For further information see 'Diagnostics' in 'Advanced
use'.

Controlling the Main Camera

Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and
OK
NOTE
Focusing camera
The Main Camera is set to autofocus by default. If the Main Camera is moved (pan/tilt/zoom), autofocus will be
switched On automatically for 5 seconds.
To manually focus the Main Camera, see 'Video Settings' in 'Advanced use'.

Selecting video sources

main cam aux doc cam
Press:
W
NOTE
HEN SELECTING THE DOC CAM OR PC VIDEO SOURCES THE SYSTEM WILL AUTOMATICALLY REQUEST FLOOR WHEN CONNECTED TO A
M
CONFERENCE AS ULTI
TANDBERG Videoconferencing System
zoom
for zooming.
I
F THE MENU SYSTEM IS ACTIVE
vcr pc
to select the video source to be transmitted to the far end.
S
ITE HOST OR CONNECTED TO AN EXTERNAL
,
THE ARROW KEYS WILL NAVIGATE IN THE MENUS
MCU. T
HIS FEATURE CAN BE SWITCHED OFF IN THE
29
General use
.
MCU
P
RESENTATIONS MENU
.