Add Multisite Entry - TANDBERG 880 User Manual

Getting started

Add MultiSite Entry

When selecting 'Add MultiSite', an empty MultiSite directory entry is displayed:
Move to 'Name' and enter the MultiSite meeting name.
1
Select 'Add Site' to add meeting membergby searching for point-to-point entries in the directory list.
2
Select 'Quality' to override the suggested bandwidth per site.
3
4 Select 'Set Restrict(56k)' to 'On' if a restricted call shall be made (A restricted call is a call to a 56Kbps network).
Q : A
UALITY PER SITE UTO
E : T
XAMPLE HE SYSTEM HAS MAXIMUM CAPACITY
TIP
1) S
INCE ALL SITES MUST USE THE SAME BANDWIDTH
2) I ,
N ADDITION MAXIMUM BANDWIDTH PER SITE CANNOT EXCEED THE TOTAL BANDWIDTH AVAILABLE DIVIDED BY THE NUMBER OF SITES
THE MAXIMUM BANDWIDTH PER SITE CANNOT EXCEED
'
PER SITE SETTING MUST BE REDUCED TO CORRESPOND WITH THE TOTAL CAPACITY OF THE SYSTEM
When finished, select 'Save' to save the MultiSite entry.
5
Add Site
Highlight the entry you want to add to the meeting and press O
'Add New Entry' to add an new point-to-point directory entry.
G
LOBAL ENTRIES WILL NOT BE AVAILABLE FOR FOR
NOTE
TANDBERG Videoconferencing System
,
FUNCTIONALITY
512
KBPS
, Q
UALITY PER SITE WILL BE
512/2=256
M S
ULTI ITE ENTRIES
. T ,
WO ENTRIES ARE ADDED ONE WITH
128 .
KBPS
. I
KBPS F THE BANDWIDTH IN
. If you do not find the entry you need, select
K
.
26
384 128
KBPS AND ONE WITH KBPS
1)
IS HIGHER THAN THIS BANDWIDTH
.
.
. I ,
N THIS CASE
, 'Q
THE UALITY