Request Floor; Release Floor - TANDBERG 880 User Manual

Request floor

When requesting the floor, the MCU will broadcast your video in full screen to all other participants in the
conference. If the MCU conference has a chairman, a floor request is sent to the chairman.
You will remain 'On Air' until either you select 'Release Floor' or the chairman decides to release the floor to
another participant.
NOTE
FLOOR WILL AUTOMATICALLY BE REQUESTED WHEN SENDING A SNAPSHOT OR SELECTING THE DOC CAM OR PC VIDEO SOURCES

Release floor

You choose 'Release Floor' to take you 'Off Air'. You should do this when you wish to make the floor available to
the other participants in the conference.
Terminal Names
Allows you to see the site numbers or name (if supported) of other sites connected in the conference.
View site # *
Allows you to view any participant in the conference other than the participant currently 'On Air'.
End view
Allows you to stop viewing the site previously chosen with 'View Site #', and returns your view to the site that is
currently 'On Air'.
TIP
'V S ' 'E V
IEW ITE AND ND
* - NOT supported by the MultiSite
TANDBERG Videoconferencing System
'
IEW CAN BE USED BY ALL CONFERENCE PARTICIPANTS
.
53
Advanced use
.