Presets - TANDBERG 880 User Manual

Presets

The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:
• Video source
• Camera position, pan/tilt/zoom/focus/brightness (if Main Camera)
• Audio source selection (see 'Audio Settings' in 'Advanced use')
Selecting presets
To select a pre-stored camera position, audio and video source, use the keys P1 P2 P3 or press P until the on-
screen indicator 'Preset 0-9'appears and use 0-9 to activate P0-P9 presets. To exit 'Preset' mode, press O
P 1 P 2 P 3
P1-P3 are the same presets as when pressing P and then a number key 1-3.
Storing presets
To store the current camera position, audio and video source:
store
• Press S
TORE
• Then press one of the keys P1 P2 P3 or a number key 0-9.
Storing preset 10 to 15
To store preset 10-15 the TANDBERG Tracker has to be used:
• Select which preset to be used on the TANDBERG Tracker (see separate documentation).
• Press S once on the TANDBERG Remote Control and wait for the on-screen indicator to appear.
TORE
• Then press the 'single person' button on the TANDBERG Tracker.
See the Tracker section in 'Peripheral Equipment' for more information about the TANDBERG Tracker.
TANDBERG Videoconferencing System
once and wait for the on-screen indicator to appear.
31
General use
.
K