Controlling The Main Camera; Selecting Video Sources; Presets - TANDBERG Videoconferencing System Short User Manual

General use

Controlling the Main Camera

Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and
OK

Selecting video sources

main cam aux doc cam
Press:

Presets

The preset buttons enable you to pre-store up to ten different camera positions.
Selecting presets
To select a preset, use the keys P1 P2 P3 or press P until the on-screen indicator 'Preset 0-9'appears and use
0-9 to activate P0-P9 presets. To exit 'Preset' mode, press O
P 2
P 1 P 3
Storing presets
To store the current camera position, audio and video source:
store
• Press S
• Then press one of the keys P1 P2 P3 or a number key 0-9.
TANDBERG Videoconferencing System
for zooming.
zoom
vcr pc
to select a video source.
P1-P3 are the same presets as when pressing P and then a number key 1-3.
once and wait for the on-screen indicator to appear.
TORE
.
K
8