Connecting Avaya Advanced Gateway 2330 Power Cables; Connecting Ac Power Cables - Avaya Advanced Gateway 2330 Installation Manual

2. Insert the DC power cable jack into the AG2330 12VDC port.
3. Connect the appropriate ends of the appropriately rated AC power cord to the power

Connecting Avaya Advanced Gateway 2330 power cables

On the AG2330, the internal power supply module is AC only requiring an external AC power
source.
Use the procedure in this section to connect AC power cables to an AG2330.

Connecting AC power cables

Average time to install one AC power cable: 1 minute.
Electrostatic alert:
ESD
Always wear an ESD-preventative wrist strap when connecting cables or performing
maintenance on an AG2330. Ensure that the wrist strap makes contact with your skin.
Prerequisites
• Ensure you have one appropriately rated AC power cord.
• Ensure the power cord is long enough that you can plug the male end into a standard
110/220 V AC power outlet.
Installation — Hardware Components
supply and to an AC outlet.
When the external power supply is successfully connected, the following message
appears on the console:
ALARMS emerg: Power Supply unit 0 is NORMAL.
When the external power supply is disconnected, the following message appears
on the console:
ALARMS emerg: Power Supply unit 0 is ABSENT.
Connecting Avaya Advanced Gateway 2330 power cables
August 2010 31