Chapter 9
Chapter 9
Wand Emulation Interface
Introduction
This chapter describes how to set up the digital scanner with a wand emulation host when Wand Emulation
communication is needed. The digital scanner connects to an external wand decoder or to a decoder
integrated in a mobile computer or Point-of-Sale (POS) terminal.
In this mode the digital scanner emulates the signal of a digital wand to make it "readable" by a wand decoder.
Throughout the programming bar code menus, default values are indicated with asterisks (
Most computer monitors allow scanning the bar codes directly on the screen. When
NOTE
scanning from the screen, be sure to set the document magnification to a level where the bar code
can be seen clearly, and bars and/or spaces are not merging.
*
*
Transmit Unknown
Indicates Default
Characters
Wand Emulation Interface
Feature/Option
*
).