Beeper Definitions For Adf - Symbol P 300STD Product Reference Manual

P 300 STD/FZY/PRO Scanner Product Reference Guide

Beeper Definitions for ADF

The following table defines beep sequences that occur during rule entry.
Beeper Sequence
Normal Data Entry. Duration of tones are short.
High-Low
Low-Low
High-High
High-Low-High-Low
High-Low-Low
Low
Low-High-High
Error Indications. Duration of tones are very long.
Low-High-Low-High
Low-High-Low
Low-High
3-8
Table 3-3. Beeper Definitions
Entry of a number is expected. Enter another digit. Add leading zeros
to the front if necessary.
Entry of an alphabetic character is expected. Enter another character
or scan the End of Message bar code.
Entry of Criterion/Action is expected. Enter another criterion or
action, or scan the Save Rule bar code.
Rule saved. Rule entry mode exited.
All criteria or actions were cleared for rule currently being entered;
continue entry of rule.
Last saved rule was successfully deleted. The rule presently being
entered is left intact.
All rules are now deleted. The rule presently being entered is left
intact. (This beep sequence has a different meaning outside of ADF.)
Out of rule memory. Erase some existing rules, then try to save rule
again. (The current rule need not be re-entered.)
Cancel rule entry. Rule entry mode exited because of an error or the
user asked to exit rule entry.
Entry error, wrong bar code scanned. Re-enter criterion or action. All
previously entered criteria and actions are retained. Criteria or action
list is too long for a rule.
Indication