Acura 2011 TL Owner's Manual page 96

On models without keyless access system
If you use the key to unlock the
driver's door, the system cannot
recognize either ''DRIVER 1'' or
''DRIVER 2.''
U.S. model is shown.
If you want to change any vehicle
control settings, select Keyless
TM
Memory Settings by pressing
either INFO button ( / ), then ▲ ▼
press the SEL/RESET button. Select
CHG SETTING, then press the
SEL/RESET button.
2011 TL
Multi-Information Display
Press the SEL/RESET
button.
Refer to the table on the following
pages about the settings you want to
customize.
DRIVER'S ID
CONTINUED
93