Super Handling-All Wheel; Drive (Sh-Awd ) System - Acura 2011 TL Owner's Manual

Super Handling-All Wheel Drive (SH-AWD ) System
If equipped
The super handling-all wheel drive
(SH-AWD) system is a full time all-
wheel-drive system that
automatically controls and transfers
varying amounts of engine torque to
all wheels independently, according
to the driving conditions.
While the SH-AWD system helps to
enhance the vehicle's driving
stability in all situations, it is still
your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
478
TM
SH-AWD Torque Distribution
Monitor
TORQUE INDICATOR
TORQUE INDICATOR
U.S. model is shown.
The SH-AWD torque distribution
monitor on the multi-information
display shows you the amount of
torque being sent to the wheels.
Each wheel right front (RF), left
−
front (LF), right rear (RR), and left
rear (LR) has its own torque
−
indicator.
2011 TL
Each torque indicator is displayed as
a bar graph divided into 5 segments.
The number of segments represents
the amount of torque distributed to
each wheel.
When there is only a slight change in
torque distribution while driving,
such as cruising on level roads at the
same speed, the torque distribution
monitor may stop displaying the
amount of torque. This is not a
system problem. The monitor will
show the amount if the system
senses any change in torque
distribution.