Acura 2011 TL Owner's Manual page 506

Resetting the Engine
Oil Life Display
Your dealer will reset the display
after completing the required
maintenance service. You will see
''OIL LIFE 100%'' on the display the
next time you turn the ignition
switch to the ON (II) position. ＊
＊ : Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178 and 181 .
If maintenance service is done by
someone other than your dealer,
reset the Maintenance Minder as
follows:
1. Turn the ignition switch to the
ON (II) position.
If the engine oil life is not
2.
displayed, press the SEL/RESET
button on the steering wheel
repeatedly.
3. Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
2011 TL
Maintenance Minder
＊
Select ''RESET'' by pressing the
4.
INFO ( / ) button, then press
▲ ▼
the SEL/RESET button to reset
the engine oil life display. The
maintenance item code(s) will
disappear, and the engine oil life
will reset to ''100.'' If you want to
cancel the oil life reset mode,
select ''CANCEL.''
TM
503