Acura 2011 TL Owner's Manual page 529

Lights
Install the new bulb in the socket.
6.
Turn it clockwise to lock it in place.
7. Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
8. Turn on the lights to make sure
the new bulb is working.
9. Push the under cover in place and
set the spoiler and inner fender
cover in the original position.
Install the bolts and tighten them
securely. Put the holding clip, and
lock it by pushing on its center.
526
Replacing a Front Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be
required. Adjustment should be
done by your dealer or another
qualified technician.
2011 TL
Start the engine. If you are
1.
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.