Acura 2011 TL Owner's Manual page 157

Remote Transmitter
Recalling a Memorized
Driving Position
Driver 1 Driver 2
When you unlock the driver's door
with your remote transmitter, each
remote transmitter activates the
customized settings related to that
remote.
154
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
Here are the settings activated with
the remote:
Customized settings
(see page 97 ).
Driving position memory
(see page ).
164
Audio system settings
(see page 226 ).
Climate control settings
(see page 216 ).
2011 TL
When you unlock and open the
driver's door with the remote, the
driver's seat (except power lumbar)
and outside mirrors move to the
positions stored in memory. An
indicator on one of the driving
position memory buttons on the
driver's door also comes on.
You will also see the ''DRIVER 1'' or
''DRIVER 2'' message on the multi-
information display, depending on
which linked remote transmitter is
used.