Acura 2011 TL Owner's Manual page 169

Driving Position Memory System
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
To change the ''MEMORY
POSITION LINK'' setting, see page
page
109 .
On vehicles with manual transmission
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
166
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the driver's
door: SET, memory button 1 or 2.
Push any of the adjustment
switches for the seat.
Adjust the outside mirrors.
Shift out of Park (automatic).
Release the parking brake
(manual).
2011 TL
If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized positions. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this driving position
for later use, you must store it in the
driving position memory.