Acura 2011 TL Owner's Manual page 294

2. Use the tune, list, or scan function
to tune to a desired channel.
In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.
3. Pick the preset button you want
for that channel. Press and hold
the preset button until you hear a
beep. You can also pick the
number with the interface dial.
Select your desired number and
press and hold ENTER on the
interface selector.
Repeat steps 2 and 3 to store the
4.
first six channels.
Press the button or scroll
5.
up again. The other XM band will
be shown. Store the next six
channels using steps 2 and 3.
Playing the XM Radio (Models with navigation system)
Once a channel is stored, press
and release the proper preset
button to tune to it.
XM Radio Display Messages
''OFF AIR'' − The channel
currently selected is no longer
broadcasting.
''LOADING'' − XM is loading the
audio or program information.
''UPDATING'' − The encryption
code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.
''NO SIGNAL'' The signal is
−
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
2011 TL
'' - - - - '' The selected channel
−
number does not exist, or is not part
of your subscription, or this channel
has no artist or title information at
this time.
''NO INFO'' − The selected
channel has no artist or title
information at this time.
''CHECK ANTENNA'' −
a problem with the XM antenna.
Please consult your dealer.
There is
CONTINUED
291