Acura 2011 TL Owner's Manual page 383

Compass
Turn the selector knob to select
''CALIBRATION.''
3.
380
Press the selector knob (ENTER)
to enter your selection. The
4.
display shows you ''PUSH CAL
START.''
While setting the compass, press
the RETURN button to go back to
the previous display. Pressing the
SETUP button will cancel the
compass setting mode.
2011 TL
Press the selector knob (ENTER).
5.
The compass display is blinking
and the CAL indicator is shown.
6. Drive the vehicle slowly in two
complete circles.
When the calibration is successfully
completed, the CAL indicator goes
off and the compass display will stop
blinking and show an actual heading.
The audio system is not related to
the compass system. Even if the
compass system is calibrating, the
display returns to the normal display
which you last selected.