Acura 2011 TL Owner's Manual page 293

Playing the XM Radio (Models with navigation system)
The scan function gives
SCAN −
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within
that category are scanned. To
activate SCAN, press the SCAN
side of the SCAN/A.SEL bar. You
will see SCAN on the screen and
center display.
The system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
SCAN side of the bar to cancel.
CHANNEL SCAN − This function
samples all channels. Push down the
interface selector to select AUDIO
MENU, then turn the interface dial
to select Channel Scan and press
ENTER on the interface selector.
290
CATEGORY SCAN −
function samples the stations in the
selected category. Push down the
interface selector to select AUDIO
MENU, then turn the interface dial
to select Category Scan and press
ENTER on the interface selector.
2011 TL
This Preset −
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the
XM1 or XM2 will be shown on the
display.
XM BAND
You can store up to 12
button. Either