Acura 2011 TL Owner's Manual page 68

Charging
System Indicator
If this indicator comes on when the
engine is running, the battery is not
being charged, and you will also see
a ''CHECK CHARGING SYSTEM''
message on the multi-information
display. For more information, see
page 561 .
Immobilizer
System Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key, on models with keyless
access system, if an appropriate
keyless access remote is used. If it is
not a properly coded key or keyless
access remote, the indicator will
blink, and the engine's fuel system
will be disabled (see page
: Models equipped with the
＊
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178 and
＊
143 ).
181 .
2011 TL
Instrument Panel Indicators
Parking Brake and
U.S. Canada
Brake System
Indicator
This indicator has two functions:
1. It comes on when you turn the
＊
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page 204 ).
CONTINUED
65