2
Burner installation
Insert cable clips with fitted cables into the clip frame
and secure by pivoting the lever (Fig. 47, Item 1).
Hook the rear wall (Logamatic 43..) with the lower
hooks into the clip frame and push the top part home,
until the hooks engage (Fig. 44, Item 2).
Fit the terminal cover (Fig. 43, Item 1) with two self-
tapping screws and secure on the control unit base
(Fig. 48).
32
1
Fig. 47
Fig. 48
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano GE315 • Issue 02/2006
Securing the electrical connection cables
Boiler with control unit installed