Speed Limit Function - Mitsubishi Electric MELSEC-L02SCPU User Manual

7.10.2

Speed limit function

If the operating speed exceeds the speed limit, this function limits the speed to within the setting range of speed limits.
To use this function, set the positioning parameter "Speed limit."
(1) Relationship of speed limit function and control
Control
OPR control
Positioning control
JOG operation
114
Machine OPR
Fast OPR
Position control
Speed control
Speed/position switching
control
Current value change
Operation when the speed limit is exceeded
No operation occurs. (The OPR speed cannot be set higher than the speed
limit using the programming tool.)
An "Out of speed range" warning (Axis 1 warning code: 1020) occurs and the
command speed is limited to the speed limit.

An "Out of speed range" warning (Axis 1 warning code: 1020) occurs and the
JOG speed is limited to the speed limit.