3Tap Pan Delay; Multi Tap Delay - Roland FA-06 Parameter Manual

Parameter Value
Delay Left
0–1300 msec,
note
Delay Right
Feedback Mode NORMAL, CROSS
Feedback -98–+98 %
200–8000 Hz,
HF Damp
BYPASS
0 .05–10 .00 Hz,
Rate
note
Depth 0–127
Phase 0–180 deg
Low Gain -15–+15 dB
High Gain -15–+15 dB
D100:0W–
Balance
D0:100W
Level
0–127

47: 3Tap Pan Delay

Produces three delay sounds; center, left and right .
L in
Triple Tap Delay
Feedback
R in
Parameter Value
Delay Left/Right/ 0–2600 msec,
Center note
Center Feedback -98–+98 %
200–8000 Hz,
HF Damp
BYPASS
Left/Right/
0–127
Center Level
Low Gain -15–+15 dB
High Gain -15–+15 dB
D100:0W–
Balance
D0:100W
Level 0–127
Explanation
Adjusts the time until the delay sound
is heard .
Selects the way in which delay sound
is fed back into the effect
(See the figures .)
Adjusts the amount of the delay
sound that's fed back into the effect .
Negative (-) settings invert the phase .
Adjusts the frequency above which
sound fed back to the effect is filtered
out . If you don't want to filter out any
high frequencies, set this parameter
to BYPASS .
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low range
Gain of the high range
Volume balance between the direct
sound (D) and the delay sound (W)
Output Level
Balance D
2-Band
EQ
Left Tap Balance W
Center Tap
Balance W
Right Tap
2-Band
EQ
Balance D
Explanation
Adjusts the time from the original
sound until the left, right, and center
delayed sounds are heard
Adjusts the amount of the delay
sound that's fed back into the effect .
Negative (-) settings invert the phase .
Adjusts the frequency above which
sound fed back to the effect is filtered
out . If you do not want to filter out any
high frequencies, set this parameter
to BYPASS .
Volume of each delay
Gain of the low range
Gain of the high range
Volume balance between the direct
sound (D) and the delay sound (W)
Output Level
48: 4Tap Pan Delay
This effect has four delays .
L in
Feedback
R in
2
1
L
Parameter
Delay 1-4 Time
Delay 1
Feedback
HF Damp
L out
Delay 1-4 Level
Low Gain
High Gain
Balance
Level
R out

49: Multi Tap Delay

This effect provides four delays . Each of the Delay Time parameters
can be set to a note length based on the selected tempo . You can
also set the panning and level of each delay sound .
L in
Feed
back
R in
Parameter
Delay 1-4 Time
Delay 1
Feedback
HF Damp
Delay 1-4 Pan
Delay 1-4 Level
Low Gain
High Gain
Balance D
Delay 1
Delay 2
Quadruple
Tap Delay
Delay 3
Delay 4
Balance D
Stereo location of each delay
3
4
R
Value Explanation
Adjusts the time from the original
0–2600 msec,
sound until delay sounds 1–4 are
note
heard
Adjusts the amount of the delay
-98–+98 % sound that's fed back into the effect .
Negative (-) settings invert the phase .
Adjusts the frequency above which
sound fed back to the effect is filtered
200–8000 Hz,
out . If you do not want to filter out any
BYPASS
high frequencies, set this parameter
to BYPASS .
0–127 Volume of each delay
-15–+15 dB Gain of the low range
-15–+15 dB Gain of the high range
D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0–127 Output Level
Balance D
Delay 1
Delay 3
Multi Tap Delay
Delay 4
Delay 2
Balance D
Value Explanation
0–2600 msec, Adjusts the time until Delays 1–4 are
note heard .
Adjusts the amount of the delay
-98–+98 % sound that's fed back into the effect .
Negative (-) settings invert the phase .
Adjusts the frequency above which
sound fed back to the effect is filtered
200–8000 Hz,
out . If you don't want to filter out
BYPASS
any the high frequencies, set this
parameter to BYPASS .
L64–63R Stereo location of Delays 1–4
0–127 Output level of Delays 1–4
-15–+15 dB Gain of the low range
-15–+15 dB Gain of the high range
IFX Parameters
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
83