Network Settings/Openvpn® Settings - Grandstream Networks GXV3380 Administration Manual

Layer 2 QoS 802.1p
Priority Value (Wi-Fi)
Country Code
Network Settings/OpenVPN® Settings
Enable OpenVPN®
OpenVPN® Mode
Enable OpenVPN®
Comp-lzo
OpenVPN® Server
Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
OpenVPN® Client
Certificate
OpenVPN® Client Key
OpenVPN® Cipher
Method
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
Configure Wi-Fi country code. The default value is "United States of
America". Note: Reboot is required to take effect.
This enables/disables OpenVPN® functionality and requires the user to
have access to an OpenVPN® server. The default setting is No. NOTE: To
use OpenVPN® functionalities, users must enable OpenVPN® and
configure all the settings related to OpenVPN®, including server address,
port, OpenVPN® CA, certificate and key.
Additionally, the user must also set the SIP account to use "VPN" for the
"Nat Traversal" (under Account  Network Settings).
Specifies OpenVPN® mode:

"Simple Mode" only supports some basic or common parameters
configuration;

"Professional Mode" supports configuration file upload, which is
totally customized by need, please refer to https://openvpn.net for
more information.
Default setting is "Simple Mode".
Configures enable/disable the LZO compression. When the LZO
Compression is enabled on the OpenVPN server, you must turn on it at the
same time. Otherwise, the network will fail to connect. Default is disabled.
The URL/IP address for the OpenVPN® server.
The network port for the OpenVPN® server. By default, it is set to 1194.
Determines transport protocol (UDP or TCP) used for OpenVPN®. Default
is UDP.
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for
authentication purposes. Press "Upload" to upload the corresponding file
to the device.
OpenVPN® Client certificate file (*.crt) required by the OpenVPN® server
for authentication purposes. Press "Upload" to upload the corresponding
file to the device.
The OpenVPN® Client key (*.key) required by the OpenVPN® server for
authentication purposes. Press "Upload" to upload the corresponding file
to the device.
The cipher method of OpenVPN®, must be the same cipher method used
by the OpenVPN® server.
GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 67