Grandstream Networks GXV3380 Administration Manual page 52

Refer-To Use Target
Contact
RFC2543 Hold
Call Forward
Call Forward Type
Dial Plan
Dial Plan Prefix
Disable Dial Plan
Dial Plan
Sets the phone system to use the target's Contact header tag to the Refer-
To header in the SIP REFER message during an attended transfer.
The default setting is "No".
If yes, c=0.0.0.0 will be used in INVITE SDP for hold.
Sets the Call Forwarding feature for this account.

None: Disable call forwarding feature.

Unconditional: Set to forward all calls to a specified account.

Time based: Set the call forwarding rule based on time. The system
can forward incoming calls to the accounts of In Time Forward to and
Out Time Forward to.

Others: Set the call forwarding rule based on following account status.
 Forward when Busy: the call will be forward to number set
under "Busy To" when the account is busy.
 Forward when No Answer: The call will be forwarded to the
number set under "No Answer To" after the configured timeout.
(range 1- 120s)
 Forward when DND: When the phone is on DND mode the
call will be forwarded to number configured under "DND To".
Configures the digits prepended to the dialed number.
Enables/disables the Dial plan mechanism for different cases. If the
specific case is checked, the Dial plan mechanism will be disabled.
 Dial Page: It controls the pattern of dialing numbers from the keypad,
phone app and account widget.
 Contact: It controls the pattern of dialing numbers from local or LDAP.
 Incoming Call History: It controls the pattern of dialing numbers from
inbound call logs.
 Outgoing Call History: It controls the pattern of dialing numbers from
outbound call logs.
 Programmable Key & Click2Dial: It controls the pattern of dialing
numbers from MPK app and the link on the webpage.
The default setting is unchecking all the cases.
Configures the dial plan to establish the expected number and pattern of
digits for a telephone number. This parameter configures the allowed dial-
plan for the phone.
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d,+
GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 52