Grandstream Networks GXV3380 Administration Manual page 51

Call Log
Enable Call Features
Mute on Answer
Intercom Call
Transfer on
3-way Conference Hang
up
Use # as Dial Key
Use # as Redial Key
DND Call Feature On
DND Call Feature Off
No Key Entry Timeout
(s)
Ring Timeout (s)
Categorizes the call logs saved for this account.

If it is set to "Log All", all the call logs of this account will be saved.

If set to "Log Incoming/Outgoing Calls (Missed Calls Not
Record)", the whole call history will be saved other than missed
call.

If it is set to "Disable Call Log", none of the call history will be
saved.

If it is set to "Do Not Prompt Missed Call", the phone will log the
missed call histories, but there is no prompt to indicate the missed
calls on phone LCD.
The default setting is "Log All".
Configures the local start command feature. If it is set to "Yes", the feature
will be enabled to recognize the local star code command. Otherwise, it will
be disabled. The default setting is "No".
When enabled, phone will mute the incoming intercom call based on Call-
Info/Alert Info Headers. Default is disabled.
Transfers conference from hosted party when hang up, thus other parties
can continue the conference without interruption.
The default setting is unchecked.
Treats "#" as the "Send" (or "Dial") key when set to "Yes". If set to "No", this
"#" key can be included as part of the dialed number or it will be used as
redial key when the input area has no number (please make sure the dial
plan is properly configured to allow dialing # out). Default is "Yes".
Allows users to configure the "#" key as the "Redial" key. If set to "Yes", the
"#" key will immediately redial the last call. In this case, this key is essentially
equivalent to the "Redial" key. If set to "No", the "#" key is treated as part of
the dialed string. Default is "Yes".
Configures the feature code to enable the DND (Do Not Disturb) feature
for this account. If it is configured, the phone will dial the feature code
automatically when the DND feature is enabled.
Configures the feature code to disable the DND (Do Not Disturb) feature
for this account. If it is configured, the phone will dial the feature code
automatically when the DND feature is disabled.
Determines the expiration timer (in seconds) for no key entry. The dialed
digit will be sent out if no other digits entered within the set period. The
default value is 4 seconds. The valid range is 1 - 15. This feature does not
work if the dialer page is entered via the Account Widget on the phone.
Defines the expiration timer (in seconds) for the rings with no answer.
The default setting is 60. The valid range is from 10 to 300.
GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 51