Grandstream Networks GXV3380 Administration Manual page 50

Video Layout
Auto Answer
Play Warning Tone for
Auto Answer Intercom
Intercom Barging
Auto Preview
Send Anonymous
Intercept Call Rejection
Defines whether to enter full screen when incoming video call is answered.

"Fullscreen": GXV3380 will show the remote video feed in full screen.

"Only display Remote Screen": GXV3380 only displays the remote
screen in full screen mode.

"Equal Split Screen": GXV3380 will show remote and local video
feeds on equal proportions.

"Default": GXV3380 will show both remote and local video feed.
Sets the phone system to allow to answer an incoming call automatically
when idle. If it is set to "Yes", the phone will automatically enable the
speaker phone to answer all the incoming calls after a short reminding
beep. If set to "Enable Intercom/Paging", it will automatically answer the
incoming calls whose SIP INVITE includes auto-answer tag in the info
header.
The default setting is "No".
When this option is enabled, the phone will play a warning tone When auto-
answering intercom.
The default setting is "Yes".
Configures whether to answer the incoming intercom call when there is
already an active call on the phone. When" Intercom Barging" is enabled,
and if the current active call is an intercom call, the incoming intercom call
will be automatically rejected; otherwise if the current active call is not an
intercom call, the current active call will be put on hold and the incoming
intercom will be automatically answered. When "Intercom Barging" is
disabled, a prompt will show up indicating the incoming intercom call without
interrupting the current active call. Default setting is disabled.
Configures whether to turn on video to preview the video of the caller. If set
to "Yes", the user can view the video and hear the caller on the incoming
page when there is an incoming call. If set to "Yes with Ringing", the caller
can view the video of the caller and hear the ringtone on the incoming page
but cannot hear the caller.
Note: If Auto Answer function has been enabled, this function does not take
effect.
The default setting is "No".
Sets the phone system to make an anonymous outgoing call. If set to "Yes",
the "From" header in the SIP INVITE messages will be set to anonymous,
essentially blocking the Caller ID to be displayed. Default is "No".
Rejects the calls whose SIP INVITE message includes Anonymous
information in from header when enabled. The default setting is "No".
GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 50