Document Revision History - Texas Instruments MSP430 User Manual

Document Revision History

Revision
Updated Figure 2-1
Added BSL handling flags F_ERASE_BSL, F_ERASE_CHECK_BSL, F_PROGRAM_BSL
SLAU101O Added new error code ERR_IMAGE_OVERWRITTEN
Added new DLL API function GangAppendImage()
Added BSL question to FAQ
Updated Figure 2-1
Updated data for Load Image Block in
SLAU101N
Removed references to restoration of DCO calibration after Info A erasure throughout.
Corrected GangLoadParameters function parameters in
Updated Figure
Changed menu item Blow Fuse to Secure Device in
Changed FuseBlown to SecureDevice in
Added Select Image command in
SLAU101M
Updated Write Target Selective in
Changed terminology from "blow fuse" to "secure device" in
GangLoadParameters, GangGetResult),
Updated FAQ
Updated Table
SLAU101L
Changes to Section
Added DLL function GangSelectImage() in
SLAU101K
Updated FAQs in
Added preproduction checklist in
Updated Table 2-3
Updated Section 2.2
SLAU101J
Added Section
Updated FAQs in
SLAU101I Added FAQ on how to determine current software version in
SLAU101H Updated Section
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
82
Revision History
Document Revision History
and Table 2-1 for GUI changes.
and Table 2-1 for GUI changes.
Table 3-1.
2-1.
Section
Section 3.1.
Table 3-1.
Section
#1.
3-1.
1.3, Section 2.2, Section 3.5.10,
Section
Section B.1.
Appendix C.
and Table 3-1.
and Section 4.1.
3.5.14.
Section B.1.
2.1.1, Section 2.1.5.1, Section
Copyright © 2003–2010, Texas Instruments Incorporated
Comments
Section 4.1.
Section 2.1.2.
2.1.5.4.
Section 3.5.2, Section
5.4.
Section 3.5.11, and Section
4.1.
Section B.1.
3.5.2, "GangLoadParameters" in
SLAU101O – March 2003 – Revised May 2010
www.ti.com
3.5.4, Section 4.1 (see
B.1.
Section 4.1