Safety Precautions - Powermate LiftGate LG-3 Installation & Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

WARNING

Read and understand all instructions. Follow the safety rules listed below

as well as the other basic safety precautions. Failure to do so may result

in serious injury.

WORK AREA

CHECK YOUR WORK AREA. Inspect your work are for obstacles such as holes,

debris or rough spots. Look for areas not able to support the load, such as access

or drain covers or soft ground. Watch out for liquid spills or slippery surfaces. Be

on the alert for anything that might cause you to lose your balance, control or

concentration. Insure that the vehicle is level. The LiftGate™ unit should not be

activated if the vehicle is on any inclination.

PLAN YOUR WORK. Arrange your work to avoid unnecessary steps or effort.

Position your vehicle for proper clearance from roadside curbs and obstacles.

Insure that the Load Chart is considered when engaging the load to be

transferred. Do not overload the PowerMate.

KEEP YOUR WORK AREA CLEAR. All visitors should be kept away from the

work area.

PERSONAL SAFETY

STAY ALERT. Always focus your attention in the direction of travel. Always maintain

proper footing and balance. Constantly check for clearance above, below and on all

sides. When loading onto or off of a vehicle, be prepared for movement in the

vehicle suspension system.

USE COMMON SENSE. Do not operate equipment when you are tired or injured.

Keep both hands positioned on unit at all times. Never play games. Do not ride on

the unit. Do not attempt to use the equipment as a jack.

MAINTAIN THE EQUIPMENT REGULARLY

DO NOT operate equipment that is known to be damaged or malfunctioning. Never

remove or override any mechanical or electrical safety devices. Poorly maintained

equipment jeopardizes the safety of the operator and all other personnel. Remember

safety is your responsibility. Complete a daily inspection procedure. Have the

equipment thoroughly checked by a competent service person at least once a year.

SECURE FOR TRANSPORT

When the equipment is not in use, ensure the LiftGate™ and the load are fully secure

before moving the vehicle.

PowerMate