Additional Items And Tools - Powermate LiftGate LG-3 Installation & Operation Manual

ADDITIONAL ITEMS & TOOLS
The installer will need to provide following tools and materials to proceed with installation:
- Drill with 13/32" Metal Drill Bit.
- 1" to 2" Metal Hole Saw.
- Wire Cutter.
- Crimping Pliers.
- 9/16 Wrench.
- 9/16 Socket & Ratchet.
- 3/8"-16NC Bolts of suitable length*.
- Wire Loom for wire protection.
- Steel Flat Bar, Angle, and/or C-Channel for vehicle floor reinforcement.
- Screw or Bolt/Nut combination to secure Ground Lug Terminal to vehicle frame.
NOTE:
Some adjustments to the Unit's Base Plate may need to be made in order to fit
the Unit around some areas of the vehicle (wheel wells, etc.) A cutting torch
may be required to reshape the Unit's Base Plate.
* The length of the Bolts are dependant on thickness of vehicle floor and vehicle floor
reinforcement. Therefore, bolt length can only be determined at time of installment.
®
PowerMate LiftGate™ Installation & Operation Manual
3.06
PN 018420 Rev.D2
Eng. 01/ 10/ 13