Section 2 - Safety; Hazard Graphical Symbols - Powermate LiftGate LG-3 Installation & Operation Manual

HAZARD GRAPHICAL SYMBOLS

®
The PowerMate
throughout the Operators Manual and on the units themselves. Operators using the
®
PowerMate must familiarize themselves with these symbols.
Safety Alert Symbol: This symbol indicates a potential personal
SAFETY LABEL MAINTENANCE
Safety of the operator and surrounding environment must be considered at all times.
To that end, safety labelling on the PowerMate
safety information. Clean the labels with soap and water. Do not use solvent-based
cleaners because they may damage the labels. Replace damaged or missing labels.
Replacement labels may be purchased from L P International Inc. Customer Service
Phone number 1-800-697-Mate.
PowerMate
products use graphical symbols, safety colours, and signal words
DANGER: Indicates an imminently hazardous situation
WARNING: Indicates a potentially hazardous situation
CAUTION: Indicates a potentially hazardous situation
NOTICE: The signal word to address practices not
related to personal injury.
2.01
®
LiftGate™ Installation & Operation Manual
injury hazard. Safety information following
this symbol must be followed to avoid
possible injury or death.
which, if not avoided, will result in death or
serious injury.
which, if not avoided, could result in death
or serious injury.
which, if not avoided, may result in minor
or moderate injury.
®
must be maintained to provide legible
PN 018090 Rev.D2
Eng. 01/ 10/ 13