Cradle Attachment Installation - Powermate LiftGate LG-3 Installation & Operation Manual

CRADLE ATTACHMENT INSTALLATION

Step 1. Extend unit approximately 24 inches. Insert the two 1/4-20NC slab sided head
Bolts into the holes provided in the Outer Frame, engaging the heads into the
extruded channels. Hang the Cradle Attachment on the bolts and retain with
two 1/4-20NC Lock Nuts.
Step 2. Using the bottom center hole in the Cradle Attachment as a guide, drill a
9/32"hole through the Outer Frame. CAREFULL! Take care not to hit the
Actuator Inner Tube when breaking through.
Step 3. Insert a 1/4-20NC x 3/4"Bolt from the Cradle side and secure the Attachment
with 1/4-20NC Lock Nut.
Outer Frame
1/4-20NC Lock Nut
Cradle Attachment
-Righthand unit shown.
-Strap removed for clarity.
1/4-20NC x 3/4"Bolt
PowerMate
Cradle Attachment Lefthand PN 480060
Cradle Attachment Righthand PN 480065
7.01
®
LiftGate™ Installation & Operation Manual
A
Slabbed sides of 1/4-20NC Special
Bolts fit into the extruded channels
in the Outer Frame. -2 places.
1/4-20NC Lock Nut
9/32"Hole
DETAIL A
PN 018790 Rev.D2
Eng. 01/ 10/ 13