Service Processor Customization - IBM 3746-900 Installation And Maintenance Manual

7. On the MOSS-E view primary panel, double-click the Service Processor object
icon.
8. Click Configuration Management.
9. Double-click SP customization.
10. If it is the first time that you invoke "SP Customization," all the items are
selected. If you are not ready to customize one or more items, click the
corresponding check box to deselect the items.
The following options are available:
a. A link definition for a Console for Java.
This link is exclusive with the DCAF link/operation. According to your
customer choice, select the option to define a DCAF or Java
b. Screen resolution option (800x600 or 640x480)
This option is only enabled for the panels that support this option. It is
mandatory to select 800x600 when an MAE is installed.
Click Modem type drop down list, then select (click) the modem and connection
type of the modem used (see notes below).
a. The list of the modems depends on the bus type of the Service Processor
installed (ISA bus or MCA bus).
b. For 7858 and 7857 for which multiple choices are prompted, you must
select the option that matches the modem setting, see "Setting the 7858
Connected to the COM1 Connector (ASYN)" on page 1-25 or "Setting the
7857 Connected to the COM1 Connector (ASYN)" on page 1-31.
c. If you want to get more details about the different modems, press Help.
Figure 1-30. Service Processor Customization
11. Click Next>> and go to step 12 on page 1-36
Note: The next step depends on the items list selected in the Service
Processor Customization panel (see Figure 1-30).
Chapter 1. Installing and Setting Up Your Service Processor
TM link.
1-35