MAP (continued)
003 (continued)
Is the screen scrambled?
Yes No
005
This symptom can appear after a screen resolution change. Perform the following
actions:
1. Power OFF then power ON the Service Processor.
2. As soon a square block appears in the top left-hand corner of the display,
3. Press F3 to recover the VGA mode.
If that does not solve your problem go to "MAP: Service Processor
Troubleshooting" on page 3-1.
006
Is the Service Processor IML complete with MOSS-E View panel displayed?
Yes No
010
Is the keyboard or the mouse, or both, locked?
Yes No
012
(Step 012 continues)
2-8
3745-XXA 2-8 3746-9X0: 6578 SPIM
004
Go to Step 006.
press Alt and F1 simultaneously.
007
Is there a message SYSxx-xxxxx (OS/2 message) displayed on screen?
Yes No
008
Go to "MAP: Service Processor Troubleshooting" on page 3-1.
009
Call support for assistance.
011
Go to Step 019 on page 2-9.
Check that the mouse cable is properly plugged into the rear of the Service
Processor.