IBM 3746-900 Installation And Maintenance Manual page 158

22. Follow the prompts until the following panel is displayed:
23. Follow the prompts to reinsert the Service Processor installation diskette, then
24. Wait (time duration is about 25 minutes) until the following panel is displayed:
25. The following panels appear successively:
26. The MOSS-E View panel is displayed followed by:
27. The MOSS-E View panel is displayed followed by a panel asking the password.
28. The Installation Chaining Process panel is displayed:
29. Check and modify parameters setting if necessary (see "Step 7: Customizing
30. When the panel shown in Figure 5-2 on page 5-15 is displayed, click Yes.
5-14
3745-XXA 5-14 3746-9X0: 6578 SPIM
Please insert configuration parameters diskette 1
Press Enter to continue.
Insert the configuration parameters diskette then press Enter.
press Enter.
LIC RESTORATION HAS SUCCESSFULLY COMPLETED
Press Enter to continue.
Press Enter, then follow the prompts.
Please wait for the MOSS-E database building (10 min)
Please wait for the MOSS-E LSCT restoration (8 min)
Service Processor customization in progress.
It may take a few minutes to complete.
Please wait..
Service Processor customization is terminated.
The Service Processor will reboot.
Please wait..
Enter the password.
You can now customize your Service Processor.
OK Cancel
Click OK.
Your Service Processor" on page 1-33 for details). Click Next>> to go to the
next panels.