Table of Contents
Advertisement
Your vehicle may include a front splitter
and front splitter wickers in the luggage
compartment. It is recommended that you
use the front splitter wickers at all tracks
featuring high speed corners and can be
used at any track regardless of cornering
speeds.
Installing and Removing the Front
Splitter Wickers
1.
Raise the front of the vehicle to access
the fastening locations.
E310372
2. Remove the five bolts from the wheel
liner.
Note: Retain 2 bolts and store them in a
safe location. These are required when the
front splitter wickers are not installed.
E310373
Mustang (CZG) GT500, United States of America, Vehicles With: SVT Performance Package, enUSA, First-Printing
Track Use
3. Remove the four M6 screws from the
outboard corner of the splitter.
E310374
4. Install the two M4.2 push nuts into the
bottom of the front splitter.
E310375
5. Locate the splitter wicker to the
vehicle. The face of the splitter wicker
with the three attaching holes should
be aligned to the wheel liner bracket.
52
Hide quick links:
Advertisement
Table of Contents
